AU-11SA – HDMI Audio De-embedder (7.1) with built-in Repeater

The AU-11SA is an advanced solution for HDMI to HDMI repeating with Audio de-embedding. Its compatible with v1.3 HDMI specifications, a cutting edge technology which defines the transfer of deep colour (12 bit) video with a high bandwidth of up to 225Mhz. Connect to source and display (HDMI), select the required audio format & output your audio format to your amplifier.This device has advanced firmware allowing audio to be de-embedded without the need to connect the HDMI display (no sink-end required).

  • HDMI audio de-embedder with built in repeater
  • Compliant with v1.3 HDMI, HDCP 1.1 and DVI 1.1 standards
  • Supports un-compressed digital LPCM 7.1, 5.1 or 2 channels and compressed digital Bitstream (Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio) through HDMI input and output ports
  • Output resolution follows input resolution. Video pass though, no scaling
  • HDMI signal amplification and equalisation supporting HDMI cable distance of 10m either side of the device at full 1080p.
  • Supports LPCM 7.1, 5.1 or 2 channel output through multichannel analogue output ports
  • Supports digital Dolby 5.1/2 and LPCM 2 channels output through optical output
  • Supports CEC bypass
  • Supports 3D signals
  • Supports xvYCC
Inputs 1x HDMI [1x HDMI Uncompressed AV and Data]
Outputs 1x HDMI [1x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x LowFrequencyEffect(LFE) & Front Centre(FC)]
1x 3.5mm Stereo mini-jack [1x RearLeft(RL) & RearRight(RR)]
1x 3.5mm Stereo mini-jack [1x RearLeftCentre(RLC) & RearRightCentre(RRC)]
1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM]
PSU: 5V/2.6A
Dimensions 102mm [W] x 146mm [D] x 25mm [H] 
Net Weight 0.50kg
Gross Weight 0.78kg
AU-11SA Manual

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

SY-300H-4K22 – HDMI to HDMI Scaler with Audio Embedding & De-Embedding, 4KUHD Support, HDMI2.0, HDCP2.2

This SY-300H-4K22 accepts and outputs a wide range of resolutions up to 4K@60Hz (4:4:4, 8-bit) with simultaneous audio embedding and de-embedding of digital (HDMI or optical) or analogue audio. Integrated EDID and HDCP management allow for control over the connected...

PUV-1H4HPL-AVLC – HDBaseT™ LITE Transmitter 1 x HDMI In, 4 x HDBaseT Outputs + Local HDMI Output, Audio De-embedding (4KHDR, HDCP2.2, HDMI2.0, PoH, AVLC)

The PUV-1H4H-AVLC is a single HDMI Input to 4 x HDBaseT™ Output Distribution Amplifier (Splitter). An advanced solution for splitting and distributing a single HDMI input (up to 4K@60Hz, HDMI 2.0 & HDCP 2.2) to 4 HDBaseT outputs as well...

PUV-1540S-RX – 100m HDBaseT™ Slimline Transmitter (4K, HDCP2.2, PoH, LAN, OAR)

The PUV-1540S-RX is designed to scale and convert HDBaseT video and audio outputting via a local HDMI output. The HDBaseT input supports resolutions up to 4K@60Hz (4:2:0, 8-bit). The scaled HDMI output supports resolutions from 640×480@60Hz up to 4K@60Hz and...

PU-HBT-EX – 100m HDBaseT™ Repeater

The PU-HBT-EX repeater is designed to extend the signal transmission distances of CYP HDBaseT™ Extender sets and Matrix systems by allowing the user to repeat HDBaseT™ signals a further 100m over CAT5e/6/7 cable. This device features full 5-Play™ functionality, including...