Overview

AU-DTI4-TX – 4 Balanced In, Analog Audio to Dante

The AU-DTI4-TX is a 4-channel analogue audio to Dante output transmitter. Thanks to the integrated support for Dante technology, which extends and routes audio across standard Ethernet networks, this unit forms an important part of an easier and more flexible system for managing large audio systems than traditional point-to-point physical wiring.

Dante does away with the bundles of heavy, expensive, multi-core analogue audio cables and replaces it with low cost, and easy to manage, Cat.5e or Cat.6 cables while maintaining the high quality expected from uncompressed digital audio.

Due to the nature of packet-based Ethernet data transmission, there is no need to worry about the traditional enemies of long distance audio extension, such as analogue signal interference, crosstalk, or signal attenuation. All of this is provided with the absolute minimum of latency (typically around 1ms).

The unit is equipped with four analogue mono audio inputs and one Dante output port which can transmit up to 4 digital audio channels and is compatible with any standard Dante audio receivers that the audio might be routed to. Each audio input can optionally supply phantom power (5v or 48v) if needed by a connected audio source, such as a microphone, as well as a Pre-Gain level adjustment.

It is powered directly by PoE (Power over Ethernet) which allows for increased installation location flexibility. Basic device configuration is provided by serial over USB while routing and network configuration management is provided via 3rd party control software.

  • Standard Dante CAT output
  • 4 configurable mono audio inputs
  • Adjustable Pre-Gain for all inputs
  • Optional Phantom Power (off, 5v, 48v) for all inputs
  • Channel Mutes
  • High quality ADC functionality with very low latency
  • Compatible with any Dante audio network
  • Powered directly by PoE (802.3af) provided by the network switch or router connected to the Dante port
  • Configuration requires Serial over USB connection
  • Simple network audio routing performed via 3rd party control software which is available for both Windows and macOS systems
Inputs 2x Phoenix (3 pin) [2x Analogue Mono Audio]
1x USB Micro [1x Service Port Propriety Data]
Outputs 1x RJ45 [1x Dante IP]
POE PSU: PoE
Dimensions 128mm [W] x 108mm [D] x 25mm [H] 
Net Weight 350g 
Gross Weight 650g 
PDF
AU-DTI4-TX Manual

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PU-305BDA-TX – Bi-Directional Analogue Audio over Single CAT Transmitter

The PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over...

PU-305BD-TX – Bi-Directional Digital Audio over Single CAT Transmitter

The PU-305BD-TX transmitter is designed to send digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample...

IP-A750TX – Audio only transmitter for IP-7000 system

The IP-A750TX (& RX) takes advantage of Audio over IP’s flexibility for all installation environments, ideal for audio-only zones within a larger AV over IP system. These products feature Analogue (Line in and Mic in) and Digital In (S/PDIF and...