Overview

PU-305BD-TX – Bi-Directional Digital Audio over Single CAT Transmitter

The PU-305BD-TX transmitter is designed to send digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample rate.This extender set also supports RS-232 signals over the same CAT5e/6 cable. The PU-305BD-TX can be powered at either end using the supplied PSU adaptor for added flexibility. Digital audio signals are supported up to a sample rate of 192Khz, and support for LPCM Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.The PU-305BD-TX is designed to work with the PU-305BD-RX receiver or the PU-305BDA-RX analogue receiver.

The PU-305BD-KIT is perfect for multi-room AV systems where the optical audio from a HDTV or amplifier can be routed back to a rack matrix for further distribution throughout a wider multi-room AV system. 

  • Supports Optical SDPIF Input & Output, plus RS-232
  • Supports up to 24bit 192kHz audio signals
  • Supports 192kHz audio up to 100m and 96kHz or lower audio up to 300m
  • Supports LPCM, DTS, Dolby Digital and Dolby Digital Plus signals
  • Supports PoE (Power over Ethernet) via a single PSU which can be connected at either end of the extender set
Inputs 1x Toslink [1x Optical Toslink DTS / Dolby Digital / 2 Channel LPCM / Dolby Digital Plus]
1x 9pin Dsub [1x RS-232 Data]
Outputs 1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM / Dolby Digital Plus]
1x RJ45 [1x Digital Audio Propriety Data]
PSU: 12V/1.25A,Bi-directional POE
Dimensions 75mm [W] x 80mm [D] x 25mm [H] 
Net Weight 0.16kg
Gross Weight 0.44kg
PDF
PU-305BD-TX Manual

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PU-305BDA-TX – Bi-Directional Analogue Audio over Single CAT Transmitter

The PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over...

IP-A750TX – Audio only transmitter for IP-7000 system

The IP-A750TX (& RX) takes advantage of Audio over IP’s flexibility for all installation environments, ideal for audio-only zones within a larger AV over IP system. These products feature Analogue (Line in and Mic in) and Digital In (S/PDIF and...

AU-DTI4-TX – 4 Balanced In, Analog Audio to Dante

The AU-DTI4-TX is a 4-channel analogue audio to Dante output transmitter. Thanks to the integrated support for Dante technology, which extends and routes audio across standard Ethernet networks, this unit forms an important part of an easier and more flexible...