PU-305BDA-RX – Bi-Directional Analogue Audio over Single CAT Receiver

The PU-305BDA-RX is an analogue Stereo over CAT5e/6/7 Receiver which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Cable (PoC) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also send audio signals back to the connected transmitter.

This receiver is designed to be used with the PU-305BDA-TX Analogue Audio Transmitter or the PU-305BD-TX Digital Audio Transmitter. When combined with the PU-305BD-TX digital transmitter, the analogue audio signal will be converted and outputted as digital audio by the transmitters’ built-in digital to analogue converter (DAC). 

  • Supports bi-directional transmission (in/out) of analogue audio and RS-232 pass-through
  • Supports Power over Cable (PoC) to the Receiver unit
  • Bi-directional RS-232 control
Inputs 2x RCA [1x Analogue  Stereo (L/R)]
1x RJ45 [1x Bi-directional Audio plus Propriety Data]
Outputs 2x RCA [1x Analogue Stereo (L/R)]
1x 9pin Dsub [1x RS-232 Data]
PSU: Bi-directional POE
Dimensions 100mm [W] x 110mm [D] x 25mm [H] 
Net Weight 0.12kg
Gross Weight 0.36kg
PU-305BDA-TXRX Manual

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PU-304-KIT – Digital Audio over CAT5e/6 Extender Transmitter/Receiver Set

Digital Audio Signals – The kit sends digital audio signals up to 150m. Simultaneous Dual Transmission – The extender transmit dual SPDIF, optical and coaxial, over single CAT5/5E/6 cable. Wide Compatibility – Digital signals are supported up to a sample...