PUV-1082-4K22N – 10 x 10 HDMI HDBaseT™ Matrix with Audio Matricing (4K, HDCP2.2, HDMI2.0, PoH, LAN, OAR, 100m)

  • [DIS] 10 HDMI In & 8 HDBaseT + 2 HDMI out – HDBaseT outputs via CAT5e/6/7 cables allows 4K UHD transmission up to 100m, while the independent HDMI outputs support a 10m transmission; compliant with HDCP2.2, HDMI2.0 and 3D content.
  • Vibrant video – Resolution from VGA~WUXGA to 4K2K@60Hz, are supported by both HDBaseT and HDMI, depending on the output display’s EDID settings.
  • Wide Bandwidth – LAN connectivity offers 100BaseT network for smart TVs or game consoles in every zone, and the Power over HDBaseT (PoH) function and Optical Audio Return (OAR) Technology is designed to be used with PUV-1530RX or PUV-1510RX receivers.
  • 10×14 Audio Matrix – This matrix incorporates an audio matrix functionality that can embed and de-embed audio across video and audio matrix; also supports conversion between digital and analogue for integration.
  • Versatile Integration – Audio outputs can be controlled directly through the matrix, including volume, mute, treble, bass and audio lip-sink correction. Audio CAT connection, along with compatible bi-directional audio modules (PU-305BD-RX & PU-305BDA-RX) allow integration with remote sources and remote audio zones.
  • Audio Format – High resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio are supported.
  • Testing Pattern – The matrix generates pattern internally to verify video signal of itself and 10 connected sink devices.
  • Multiple Control Access – As we provide control drivers for all major control systems, control is via manual selection buttons, IR, RS-232, Telnet or Web GUI.
  • HDMI 2.0, HDCP1.4 and HDCP2.2 compliant
  • Routes ten HDMI sources to ten displays using eight HDBaseT outputs and two independent HDMI outputs
  • HDBaseT 5-Play™ convergence: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT) and control (Bi-Directional IR)
  • Supported HDBaseT resolutions: VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K@24Hz 4:2:2 HDR 
  • Supports resolutions up to 4K@60 (YUV 4:4:4) & HDR on HDMI output ports
  • Supports automatic 4K@60 YUV 4:4:4 to YUV 4:2:0 conversion for HDBaseT outputs
  • Supports automatic 4K HDR conversion for HDBaseT outputs as required
  • Supports HDMI inputs and HDBaseT / HDMI outputs HEX based CEC messaging
  • Supports HDBaseT output downscaling
  • 4K/2K & 4K UHD signals can be transmitted up to 70m via CAT5e/6 and 100m via CAT6a/7
  • Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS X
  • Supports audio matrix functionality enabling full audio management of the system including HDBaseT audio zone selection, fully independent audio only zones and HDMI audio embedding and de-embedding
  • Supports Digital to Analogue Conversion (DAC) and Analogue to Digital Conversion (ADC) for audio integration
  • Supports on-board audio over CAT inputs and outputs for transmission up to 150m
  • Supports Volume, Mute, Treble, Bass, and Audio delay for lip-sync on direct audio outputs
  • Supports Audio Pre-Gain level adjustment for all digital and analogue audio inputs
  • HDBaseT outputs with Optical Audio Return (OAR) system
  • Audio mixer function
  • Advanced internal and external EDID management with 4 sets of configurable EDID settings
  • Internal test pattern generation for self-testing and sink device testing. (Internal test patterns up to and including 4K signals)
  • Bi-directional IR support over HDBaseT 
  • Control is via RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
  • Supports OSD for input and output naming plus banner text
  • 2U rack mounted design
Inputs 10x HDMI [10x HDMI  Uncompressed AV and Data]
8x RCA [4x Configurable Analogue Audio Stereo (L/R)]
2x RJ45 [2x bi-directional audio plus Propriety Data]
9x 3.5mm Stereo mini-jack [9x Infra Red Receiver]
1x RJ45 [1x IP Control / LAN Serving]
1x 9pin Dsub [1x RS-232 Data]
2x Toslink [2x Optical 2 Channel LPCM]
2x RCA [2x Coaxial 2 Channel LPCM]
Outputs 8x RJ45 [8x HDBaseT HDMI & Propriety Data]
2x HDMI [2x HDMI Uncompressed AV and Data]
24x RCA [12x Zone and Extended Audio Stereo (L/R)]
11x 3.5mm Stereo mini-jack [11x Infra Red Emitter]
PSU: 24V/6.25A
Dimensions 316mm [W] x 428mm [D] x 96mm [H] 
Net Weight 6500g 
Gross Weight 8500g 
PUV-1082-4K22N Manual

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PUV-1082-PRO – 10 x 10 HDMI HDBaseT™ Matrix with Audio Matricing Independent Scaling, AVLC (4K, HDCP2.2, HDMI2.0, PoH, LAN, OAR, 100m)

10 HDMI In & 8 HDBaseT + 2 HDMI out – HDBaseT outputs via a single CAT5e/6/7 cable allows 4K UHD transmission up to 100m, and up to 10m via independent HDMI outputs, compliant with HDCP2.2, HDMI2.0 and 3D content....