Overview

PUV-1082-PRO – 10 x 10 HDMI HDBaseT™ Matrix with Audio Matricing Independent Scaling, AVLC (4K, HDCP2.2, HDMI2.0, PoH, LAN, OAR, 100m)

  • 10 HDMI In & 8 HDBaseT + 2 HDMI out – HDBaseT outputs via a single CAT5e/6/7 cable allows 4K UHD transmission up to 100m, and up to 10m via independent HDMI outputs, compliant with HDCP2.2, HDMI2.0 and 3D content.
  • AVLC Technology – Adaptive Visually Lossless Compression technology enables HDBaseT to transmit at data rates up to 18Gbps, exceeding 10.2Gbps limitation of HDBaseT technology.
  • Video Scaling – Resolution from VGA~WUXGA to 4K UHD 10/12-bit HDR, are supported by both HDBaseT and HDMI, while PUV-1082-PRO also supports independent video output scaling, which is helpful transmitting 4K image to a standard 1080p display.
  • Wide Bandwidth – LAN connectivity offers 100BaseT network for smart TVs or game consoles in every zone, and the Power over HDBaseT (PoH) function and Optical Audio Return (OAR) Technology is designed to be used with PUV-1830RX-AVLC or PUV-1810RX-AVLC receivers.
  • Versatile Integration – Audio outputs can be controlled directly through the matrix, including volume, mute, treble, bass and audio lip-sink correction. Audio CAT connection, along with compatible bi-directional audio modules (PU-305BD-RX & PU-305BDA-RX) allow integration with remote sources and remote audio zones.
  • Audio Format – High resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio are supported.
  • Testing Pattern – The matrix generates pattern internally to verify video signal of itself and 10 connected sink devices.
  • Multiple Control Access – As we provide control drivers for all major control systems, control is via manual selection buttons, IR, RS-232, Telnet or Web GUI.
  • HDMI 2.0, HDCP1.4 and HDCP2.2 compliant
  • Routes ten HDMI sources to ten displays using eight HDBaseT outputs and two independent HDMI outputs
  • HDBaseT 5-Play™ convergence: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT) and control (Bi-Directional IR & RS-232 pass through)
  • Supports up-to 4K UHD (18Gbps, 4K @50/60Hz 4:4:4 8-bit) video input
  • AVLC (Adaptive Visually Lossless Compression)
  • Supports 10-bit and 12-bit HDR (High Dynamic Range)
  • Supports output resolutions up to 4K @50/60Hz (4:4:4 8-bit)
  • 4K 3G Timings and 1080p up-to 100 Metres, 4K 6G Timings upto 70 Metres
  • Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
  • Supports audio matrix functionality enabling full audio management of the system including HDBaseT audio zone selection, and fully independent audio only zones
  • Supports Digital to Analogue Conversion (DAC) and Analogue to Digital Conversion (ADC) for audio integration
  • Supports on-board audio over CAT inputs and outputs for transmission up to 150m
  • Supports Volume, Mute, Treble, Bass, and Audio delay for lip-sync on direct audio outputs
  • Optical Audio Return (OAR)
  • Advanced internal and external EDID management with 4 sets of configurable EDID settings
  • Internal test pattern generation for self-testing and sink device testing. (Internal test patterns up to and including 4K signals)
  • Supports HDCP repeating and CEC functions
  • Control is via RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
  • 2U rack mounted design
Inputs  10x HDMI [10x HDMI Uncompressed AV and Data]
8x RCA [4x Configurable Analogue audio Stereo (L/R)]
2x Toslink [2x Configurable Digital Optical audio DTS / Dolby Digital / 2 Channel LPCM / Dolby Digital Plus]
2x RCA [2x Configurable Digital Coax audio DTS / Dolby Digital / 2 Channel LPCM / Dolby Digital Plus]
2x RJ45 [2x Digital Audio Propriety Data]
9x 3.5mm Stereo mini-jack [9x Infra Red Receiver]
1x RJ45 [1x IP Control / LAN Serving]
1x 9pin Dsub [1x RS-232 Data]
Outputs  8x RJ45 [8x HDBaseT AVLC  HDMI & Propriety Data]
2x HDMI [2x HDMI Uncompressed AV and Data]
8x RCA [4x Analogue Stereo (L/R)]
2x RJ45 [2x Digital Audio Propriety Data]
11x 3.5mm Stereo mini-jack [11x Infra Red Emitter]
POE PSU:  24V/6.25A
PSU:  24V/6.25A
Dimensions  438mm [W] x 316mm [D] x 88mm [H] 
Net Weight  6.50kg
Gross Weight  8.00kg
PDF
PUV-1082-PRO Manual

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PUV-1082-4K22N – 10 x 10 HDMI HDBaseT™ Matrix with Audio Matricing (4K, HDCP2.2, HDMI2.0, PoH, LAN, OAR, 100m)

[DIS] 10 HDMI In & 8 HDBaseT + 2 HDMI out – HDBaseT outputs via CAT5e/6/7 cables allows 4K UHD transmission up to 100m, while the independent HDMI outputs support a 10m transmission; compliant with HDCP2.2, HDMI2.0 and 3D content....