Overview

SDV-CTRX – SDVoE 18Gbps HDMI over CAT Transceiver Extender (HDMI, HDCP2.2, HDMI2.0)

  • High Quality Transmission – Using a sophisticated ultra-light compression, 4K HDR (6G) video signals, via HDMI or Displayport, are transmitted over a 10G IP network with zero latency and without losing any signal; advanced HDMI content, 10-bit colour and HD Bitstream audio can be transmitted in pass-through mode.
  • Flexible in Installations – SDV-CTRX is designed to transmit data and control signals, including IR, USB and Ethernet, and can be function as either transmitter or receiver, with EDID and HDCP compatible.
  • Advanced Function – With additional control center, multiple tranceivers can be used together as a distributed video matrix, a multiviewer system, or a video wall system, creating IP switchable with minimum latency and independent breakaway A/V matrix switching.
  • Simple Configuration – Basic configuration of the unit can be achieved via front panel buttons with an On-Screen Display (OSD).
  • HDMI 2.0 and DVI 1.0 compatible 
  • HDCP 2.2 and HDCP 1.x compliant 
  • Can be configured to function as either a Transmitter or a Receiver 
  • 1 x HDMI and 1 x DisplayPort input
  • 1 HDMI output (Functions as local monitor output in Transmitter mode) 
  • 1 x analogue stereo jack (switchable between input/output mode) 
  • IP switchable with minimum latency (requires optional control hardware or control software) 
  • Ultra-light compression, lossless for most content 
  • Independent breakaway A/V matrix switching (requires optional control center or control software) 
  • Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Genlock mode only) 
  • Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI or DisplayPort sources 
  • Analogue stereo audio extension, embedding and de-embedding (insertion and extraction requires optional control hardware or control software)
  • Bi-directional LAN, IR, RS-232 & USB 2.0 extension 
  • Signal transmission interfaces with 10-Gigabit Ethernet switches via XFI, IEEE 802.3ae
  • Basic configuration via front panel buttons with an On-Screen Display (OSD) 
Inputs 1x HDMI [1x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x TX mode - analogue  Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x Phoenix (3 pin) [1x Reserved for future use RS-232]
1x RJ45 [1x GbE LAN Serving]
1x USB 3 Type B [1x Service Port Power & Data]
1x RJ45 [1x RX mode - SDVoE CAT  HDMI & Propriety Data]
Outputs 1x HDMI [1x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x RX mode - Analogue Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
1x RJ45 [1x TX mode - SDVoE CAT HDMI & Propriety Data]
PSU: 12V/3A
Dimensions 231mm [W] x 108mm [D] x 25mm [H] 
Net Weight 0.62kg
Gross Weight 1.40kg
PDF
SDV-CTRX Manual

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

SDV-FTRX-U – 4K UHD+ HDMI/DisplayPort over IP Transceiver with USB Extension

The SDV-FTRX-U is designed for high-quality, IP routable, AV extension with minimum latency. Every Transceiver can be configured to function as either a Transmitter or a Receiver, enhancing the flexibility of any installation. By using a sophisticated ultra-light compression scheme...

SDV-FTRX – SDVoE 18Gbps HDMI over fiber Transceiver Extender (HDMI, HDCP2.2, HDMI2.0)

Flexible in Installations – SDV-FTRX is designed to transmit data and control signals, insluding IR, USB and Ethernet, and can be function as either transmitter or receiver; the use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of...

APC-USB – USB Power Cord

The USB Power cable with locking DC connector is designed to utilise the USB output from your TV to power a range of CYP products. These cables are available as an optional accessory for CYP products providing another level of...